The Polar Precision Performance Software is a ground-breaking analysis software that gives you high-tech tools for gathering and studying the data provided by your heart rate monitor. Using your own PC, you can update your semi-automatic training diary, design your training sessions, build a personal resource of past routines, reports and performance details or send settings and reminders to your Polar Heart Rate Monitor using infrared communication.

The Polar Precision Performance Software comes along with Polar AXN500, Polar AXN700, Polar S410, Polar S520, Polar S610i, Polar S625X, Polar S720i, Polar S725X, Polar S810i and is compatible with Polar S120, Polar S150 and Polar S210 products.

Operating System	Windows 98 or later
Processor	At least Pentium 200 MHz
Memory (RAM)	Minimum 32 Mb
Monitor	At least SVGA resolution monitor ( 800*600 )
Data Port	Serial port, USB port or IrDA supported internal IR port *
Speakers	A dynamic speaker **
Microphone	External or internal microphone ***
Sound Card	Sound Blaster compatible ****
Drive	CD-ROM drive for the software installation

* Serial RS232c port is required if you are using Polar IR Inteface for serial port

* USB port is required if you are using Polar IR Interface for USB port. With USB, the operating system should be Windows 98 or later.

* IrDA supported internal IR port can be used with Polar S810i / S720i / S710i / S610i / AXN500 and AXN700 HR monitors.

     Polar Precision Performance 4 Software Help Guide
Adobe Macromedia Flash player will need to be installed on your web browser to view this manual. Loading of the contents tab may initially be slow.

An Online Polar Precision Performance 4 Help Guide »


Download the PPP 4 software Help File »
The software Help File has been converted to a PDF document


     Note.

The F55, AXN500 and AXN700 HR monitors will not work with the Polar serial or the Polar USB infrared interfaces.   (This is because the Polar infrared interfaces are proprietory and not strictly IrDA compliant and the F55, AXN500 and AXN700 HR monitors are IrDA compliant).

The new IR-721 USB2.0 IRwave is compatible with these above models.
* The IR-721 USB2.0 IRwave is NOT Compatible with the older non-IrDA compliant S610, S710 and S810 hrm's.

** A dynamic speaker is needed for Polar UpLink data transmission that can be used with all S-series HR monitors. A dynamic speaker has a magnet inside. Usually laptops have piezoelectronic speakers that does not include magnet. A solution for laptops is to use headphones that normally have dynamic speakers. Via Polar UpLink you can upload settings from Polar Precision Performance software to a S-series HR monitor.

*** A microphone is needed for exercise data transmission via SonicLink from a HR monitor to Polar Precision Performance SW 4 or later.

**** A sound card is needed if you are using SonicLink data transmission or Polar UpLink. In practice, all current sound cards are Sound Blaster compatible.